My Bodywork Isnt Sitting Level

[GWtaylor 8 1 Cars]

took this picture and drivers side light, indicator, bumper aint sitting level as other side.

 

have checked for accident damage none

it seems all bolted up correctly with no play on bumper or anything

 

is this normal for french put together?

 

[welshpug 1,646]

looks like you need to move the outer headlamp bracket down a bit.

[Kezzer30 40 1 Cars]

Tbh a few bits dont sit level on mine. But its minimal

Edited April 1, 2013 by Kezzer30

[GWtaylor 8 1 Cars]

looks like you need to move the outer headlamp bracket down a bit.

ahh didnt know i could do that

[Slo 283 1 Cars]

thats unusual cos my drivers side headlight, infact everything on that side like yours is higher than the passenger side, i've never attempted to lower it all though

[allye 530 3 Cars]

There is loads of play and adjustment in that sort of area, you just need to loosen it off and fit it correctly.

[bigalthenutter 8 2 Cars]

pretty much everything on the front is adjustable just have a play about with a 10mm spanner

when i rebuilt mine it took a lot of messing on trial and error to get wings, bonnet ,lights and bumper to look right

[speno 239 2 Cars]

Move the number plate further down too

Like a few said just adjust it , might be rusted tho the screw head/nut