205 Beam With 306 Arms

[arwel 43 2 Cars]

If I was to run a 205 beam with 306 arms would it be fine with the normal 205 front set up? or will the extra width at the back upset the balance of the car?

[stef205 92 1 Cars]

You won't gain any width with a 205 beam with 306 arms unless you use the complete 306 rear brake setup, I use 306 arms on my 309 tube i think with the 306 disc setup I gained a extra 1/2" I think

Edited March 20, 2013 by stef205

[arwel 43 2 Cars]

This beam has the 306 discs and calipers on it already. Will it make much handling difference with that set up and a normal 205 set up at the front?

[stef205 92 1 Cars]

I can't remember the exact specs but 306 arms give neg camber and toe, mine is alot more stable than with 205 arms

[arwel 43 2 Cars]

Brilliant.. thats what I wanted to hear. I suppose anything will be an improvement over the dead one that was on there. Cheers

[welshpug 1,646]

it's 9mm extra per side, so not quite as much as a 309 beam.

[dcc 855]

Ninja meirion!

[calvinhorse 870]

it's 9mm extra per side, so not quite as much as a 309 beam.

Exactly 9mm?

[d7ve_b 44 1 Cars]

I run 306 rear arms (+ discs) on a 205 tube and enjoy the extra width

[wicked 103 3 Cars]

I can't remember the exact specs but 306 arms give neg camber and toe, mine is alot more stable than with 205 arms

 

Wasn't it only with gti-6 arms??

[jamie_1992 66 1 Cars]

I run 306 rear arms (+ discs) on a 205 tube and enjoy the extra width

thats what she said...

[welshpug 1,646]

 

Wasn't it only with gti-6 arms??

No, any 306/zx/xsara disc due to the additional offset of abs hubs specifically.

[chipstick 382 1 Cars]

There's a thread somewhere (I can't find it) which states the camber and toe from various arms.

[GeorgeXS 32]

Yeah there is, i did have it bookmarked but can't find it. There was a list knocked up by Sandy covering about everything that could be fit on 205/309/306/ZX/Xsara beams.