Are These The Right Piston Rings?

[Karl 15 1 Cars]

http://www.precisionintl.com/Part.aspx?ID=46284&EID=3789 just looking for comfirmation these are the correct rings for an xu10j4rs engine (gti6)

 

cheers

[Anthony 1,003]

No - they're for the earlier 2.0 Mi16/S16 (XU10J4) engine

 

From memory, two of the rings are the same and one is different on the 2.0 GTi-6 (XU10J4RS) engine.

[Karl 15 1 Cars]

ok thanks anthony any idea where to source the ones im looking for other thn pug

[jamie_1992 66 1 Cars]

gti engine parts

i called them when i was going to rebuild a gti6 engine

had rings, big ends and mains for £150

 

http://www.gtiuk.co.uk/

 

you will have to call and ask for the european side

Edited March 11, 2013 by jamie_1992

[Karl 15 1 Cars]

spot on jamie cheers mate

 

 

edit: i have E-mailed them and now await reply so thanks for the help jamie

Edited March 11, 2013 by Karl

[welshpug 1,657]

Top ring is the same as a c20 or a z20, i had trouble finding the rs kit so my supplier swapped the top rings at no extra cost, bottom two as anthony said are the same.

 

Cost about £50 from memory, pug want about that per piston!!

Edited March 11, 2013 by welshpug

[Karl 15 1 Cars]

Top ring is the same as a c20 or a z20, i had trouble finding the rs kit so my supplier swapped the top rings at no extra cost, bottom two as anthony said are the same.

 

Cost about £50 from memory, pug want about that per piston!!

 

yeh ano its effin stupid lol dont supose you could get me some and ill pay you for em ??

[welshpug 1,657]

Far easier for you to sort yourself tbh!

 

Just find your local engine machine shop, most use Ferrari's piston services which is a trade engine parts supplier.

[Mad Scientist 106]

Vauxhall C20xe full ring pack is the same. Available on eBay.

[Karl 15 1 Cars]

Vauxhall C20xe full ring pack is the same. Available on eBay.

 

can anyone confirm this

[Karl 15 1 Cars]

http://www.ebay.co.uk/itm/VAUXHALL-ASTRA-CALIBRA-REDTOP-C20XE-20XE-PISTON-RING-SET-ALL-4-CYLINDERS-/380422625041?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5892f49711 heres the ones you where talking about

dimensions:

x2 - 1.5mm
x1 - 3.0mm
bore 86mm

 

is this correct??

[Karl 15 1 Cars]

can anyone confirm the above are the correct rings to fit a xu10j4rs

[Mad Scientist 106]

Yes they are, but if I was you id pay a little extra for the Goetze rings. Much better German quality.

 

The xu10j4 has 1.5mm top ring, 1.75mm middle and 3mm oil control ring.

The xu10j4rs has 1.5mm top ring, 1.5mm middle and 3mm oil control ring.

 

The c20xe goetze oil control ring is a better design than the Peugeot oe ring too.

[Mad Scientist 106]

http://www.ebay.co.uk/itm/VAUXHALL-C20XE-C20NE-PISTON-RINGS-STD-ASTRA-CAVALIER-CALIBRA-KITCAR-/300865176602?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item460cf6441a

 

Used them in a couple of engines personally with no problems and I think they are what Miles uses.

Edited March 12, 2013 by Mad Scientist

[Karl 15 1 Cars]

cheers pete spot on

anybody looking for piston rings for the xu10j4rs look for the above vauxhall c20xe piston rings in these measurements:

 

1.5mm top ring, 1.5mm middle and 3mm oil control ring bore 86 mm hope this helps