Relocating The Brake Servo

[205Mi16Mick 1]

Here's another solution to the master cylinder clearance issue. The transfer setup is off a 406 - all it needed was shortening, and a mounting and adapter plate made up. The best bit is that it works. Well, at least it looks like it will once the pipes have been redirected.

 

 

 

 

 

 

 

 

 

[welshpug 1,666]

do you get the 106 out there? or the 206? these both would offer very similar setups but narrower than the 406 by some margin I would imagine.

[205Mi16Mick 1]

Nope, no 106s here. But we do get the 206. I only got the idea because I bought a 406 as a donor car for its engine.

[Slo 283 1 Cars]

That's a great idea but aren't 406's on the same side as the 205's in the uk? I have seen this setup in cars before though and this would be perfect for mine.

[welshpug 1,666]

no, all rhd 406's use that setup, as do 106's and 206's, also 307/8, possibly the 207 and 8 but I have only been under the bonnet of those very briefly.

[Slo 283 1 Cars]

Nice I didn't know that thanks mei a friends got a 206 i'll have a good sniff at it later. I kept the brake servo from my 605 and its insane massive wonder if i could make it fit to a 206 setup that would make awesome powerful braking. I would have to change my 1.6 hubs for 1.9's and get 1.9 shafts and possibly gti6 brake calipers too!

Edited February 26, 2013 by Slo

[welshpug 1,666]

I couldnt think of anything worse to do, make it like a modern car with absolutely no pedal feel.

[Slo 283 1 Cars]

I know what you mean truly but a big cast iron lump thats over powered for my little skip with two children in the back is a bit of a safety concern for me and the brakes in my 605 were the best brakes i've ever known upto now anyway (I know it wont be the same though - no abs for a start)

[j_turnell 137 3 Cars]

You can also use the complete mondeo setup as per this thred http://forum.205gtidrivers.com/index.php?showtopic=134994

[calvinhorse 870]

Welldone, great solution

 

My solution was to stick with an 8v

[rallyeash 155]

Seems a lot of effort to me for a very simple mod to a standard servo to except 16v