Afm And Ignition Amp Replacement Connectors

[ALEX 98 1 Cars]

I read on here somwhere that you could buy the connectors that fit inside these plugs.

Where can I get them from?

 

[Anthony 1,003]

Most places that sell the plugs should do the pins individually as well - Vehicle Wiring Products for example

 

Your biggest issue is likely to be that the wire on the loom will be heavily corroded for a few inches back from the plug thanks to Peugeot using such crappy unsealed connectors, and new pins crimpled onto corroded wire isn't exactly ideal.

[ALEX 98 1 Cars]

I was thinking ebay?

The connectors inside the AFM plug are the same as the ignition modual (really thin ones)

they are harder to get out than put back in.

[farmer 328 1 Cars]

I use contralube on the exposed terminals keeps water out.

[Anthony 1,003]

Plenty of products that you can use to prevent the problem from occuring, but the point is that neither Peugeot nor previous owners did that, and hence these days the original wiring looms all suffer from corroded wire problems that make simply replacing pins on a connector rather more problematic and time consuming than it should logically be.

 

IMO, it's the single biggest oversight that Peugeot made on the 205/309 series cars, and is responsible (along with ham-fisted attempts at repairing it) for probably 80-90% of electrical problems I'd say.

[farmer 328 1 Cars]

Totally agree Anthony.

 

I had replace my whole loom, ever since that day no electrical faults.