1.1 Drive Shafts To Gti Hubs

[Smithster92 2]

Not sure if this is the right place or not but i have a 1.1 205 96 (P) and i was after a set of gti shocks and hubs with breaks will this be a straight fit? Cheers james

[welshpug 1,661]

1.6 gti will fit, 1.9 will not.

[Smithster92 2]

How can i tell the difference pal? Cheers

[ORB 227 1 Cars]

1.9 shafts have a hole drilled in them at the wheel end to accept an R clip and 1.6's have a nut with an edge to peen down to grip the shaft.

[Smithster92 2]

Cheers guys

[welshpug 1,661]

Not quite that simple, i have 1.9 shaft with the staked nut.

 

Base model and 1.6 use m20 thread, 30mm nut, 1.9 uses m24 threads and 35mm nut.

[Smithster92 2]

Will the bottom ball joint still fit or will i need a new subframe/bottom arms? Cheers

[welshpug 1,661]

that is the same size

[Smithster92 2]

Thankyou guys

[calvinhorse 870]

You can keep your original hubs and fit 1.9 brakes and gti shocks

[pug_ham 244 3 Cars]

Not sure if this is the right place or not but i have a 1.1 205 96 (P) and i was after a set of gti shocks and hubs with breaks will this be a straight fit? Cheers james

It is now, it's brakes btw.

 

Struts for either a 1.6 or 1.9 will fit straight over but the antiroll bar drop link attachment can hit the inner wing rigid brake pipe to flexi bracket & the springs might not be best suited to your car due to the engine weight difference.

 

g