Map For An 8V Xu On Bodies, Dta S-Series Ecu

[welshpug 1,657]

Would anyone have something suitable to get myself and DCC started?

 

Both 1.9's, with Jenvey's.

 

Dan has an S60 ECU, 11 ish compression, Newman PH3 cam.

 

I have S40, standard 9.6 compression, PT36 cam.

 

 

 

Bring on the trumpets, and the joy of Bwarp.

Edited January 30, 2013 by welshpug

[Rippthrough 98]

Twiddle the fuelling until you get it idling well warm and then copy a rough guesstimate of the torque curve into the fuelling tables, plus a bit for safety, sorted, one rough map until you can get it done right.

[kyepan 291]

ohhh , get some videos up once started Mei.

To be honest we started mine on a base map from the pre loaded maps in dtawin.

I think it may have been the vauxhall XE, we had to trim down the fuelling at idle to get it to run because of my injectors.

[S@m 156]

Reeeaaaalll unhelpful post here - but sod this, a map for 16v ZX's is what you really want! :

[welshpug 1,657]

Yeah I noticed the 2.0 XE on taper bodies map, just wondered if anyone had something a bit closer

[dcc 855]

16v's are for pussys.

 

(fingers crossed the 8v I have doesn't blow up!)

 

[niklas 1]

Use the Zetec w/o MAP as base map, tweak the settings for trigger, sensors, fuel injectors.

Something like that should get you started!

 

At least that's the plan I have for my MI16 on bodies and S60.