Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
dave205

Gti6 Vs 2.0 8V Turbo Injectors

Recommended Posts

dave205

What are the differences between gti-6 and 2.0 8v turbo injectors, i assume flow rates are different but fitment is similair?

Share this post


Link to post
Share on other sites
stef205

Fitment is the same I had some when doing my supercharger conversion

Share this post


Link to post
Share on other sites
dave205

Would i gain anything from fitting a set to my 2.0l turbo engine?

Share this post


Link to post
Share on other sites
dcc

bigger fuel bills.

  • Like 1

Share this post


Link to post
Share on other sites
Baz

Do you have controllable engine management?

 

If not, forget it.

Share this post


Link to post
Share on other sites
cybernck

What's the exact difference in flow rates then?

Share this post


Link to post
Share on other sites
dave205

Do you have controllable engine management?

 

If not, forget it.

No i dont

Share this post


Link to post
Share on other sites
pip470

Does anybody know? On the search. Thanks Phill.

 

Gti 6 is around 266 to 300cc. Info found on the gti 6 forum

Share this post


Link to post
Share on other sites
welshpug

Whats the part number on the turbo ones and what power are you aiming for?

Share this post


Link to post
Share on other sites
pip470

I have two sets, one set red one set beige.

Its just nice to know whats what.

I will take an injector out and see if i can see the number.

Not really aiming for a power figure, I want to run around a bar from this set up.

Share this post


Link to post
Share on other sites
calvinhorse

Wayne scoffield (chipwizzard) mapped my bros supercharged mi and found gti6 injectors were only good for 190bhp

Share this post


Link to post
Share on other sites
welshpug

crumbs, how inefficient is that setup!

 

I dug a part number of 1984 75 on servicebox, then found 0280 150 701 via google,

 

they look to be rated at 249cc/3bar, so not a great deal smaller than gti6, beige tops, often used for over 200 bhp easily.

 

Also original equipment on S38 engined M5's which are 55.8 bhp/cylinder (i.e 223 bhp if it was a 2.5 litre 4, not a 3.8 litre 6.) they run 3.5 bar afaik.

Edited by welshpug

Share this post


Link to post
Share on other sites
calvinhorse

crumbs, how inefficient is that setup!

 

I dug a part number of 1984 75 on servicebox, then found 0280 150 701 via google,

 

they look to be rated at 249cc/3bar, so not a great deal smaller than gti6, beige tops, often used for over 200 bhp easily.

 

Also original equipment on S38 engined M5's which are 55.8 bhp/cylinder (i.e 223 bhp if it was a 2.5 litre 4, not a 3.8 litre 6.) they run 3.5 bar afaik.

Is that aimed at my comment?

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×