Carb Conversion

[hillbilly 3]

Im doing a carb conversion <twin webber 45's> and im having problems to get the alternator and power steering pump to fit.

The alternator hits the manifold. How can i get round this? Its on a 1.9 8v

 

 

Thanks Ryan

[Baz 421]

Remove the PAS. You'll struggle otherwise I'm afraid!

 

Weber.

[cybernck 402 1 Cars]

Electric Power Steering Conversion

[Miles 331 1 Cars]

Dead Easy

 

Alloy sump and PAS relocation kit

 

Please note the pic was work in progress

Edited December 18, 2012 by Miles

[hillbilly 3]

What engine will i get the sump from also the pas kit?

 

Thanks Ryan

[Miles 331 1 Cars]

Sump can be any Mi16, 205 AC sump, GTi6 sump etc, Pump is just a std GTi6 pump with custom/modded PAS pipes

[hillbilly 3]

I have a gti6 sump and pump so that should fit all fine?

[Miles 331 1 Cars]

Yes it will, just remove the Plate on the bottom of the block and it will bolt on

[welshpug 1,661]

Interesting one that arrangement Miles, I guess given the location of the pump that S16 (or 16v ZX) pipework would go straight on.

 

How much is one of those brackets?

[Miles 331 1 Cars]

It was a custom end on the std 205 pipe over the box as it was the easiest option at the time and the pipe was almost new too, Lynx charge around £100.00 for it but old copy it has them on the 306 Forum at £50.00, It does need spacing differently thou so not a direct fit

[welshpug 1,661]

Might as well have a crack at making my own one then, got some plate here I'm sure