Xsara Vts Be3 Gearbox Speedo Drive Housing Torque

[laldy875 6 1 Cars]

Hi,

thanks to welshpug's handy part number post I will be replacing the white speedo cog so I get a more accurate reading of speed.

Does anyone know the speedo drive housing torque? Apparently the endfloat is 0.08mm +/-0.04?

It's a tran-x plate diff if that makes any difference?

thanks for the help,

Tom

(baws should have posted in gearboxes)

Edited December 6, 2012 by laldy875

[pug_ham 244 3 Cars]

From Haynes;

 

Speedo pinion housing; 9lbft

Final drive extension housing bolts 11lbft

 

The diagram in my haynes calls it the final drive extension housing.

 

g

 

[laldy875 6 1 Cars]

 

From Haynes:

Speedo pinion housing; 9lbft

Final drive extension housing bolts 11lbft

 

The diagram in my haynes calls it the final drive extension housing.

 

g

 

Thanks. Just to clarify: no shim in housing = no endfloat check?

 

 

Edited December 6, 2012 by laldy875

[welshpug 1,661]

my haynes says +0.1mm preload, but I believe if there is no spacer then you don't worry about it, drop Miles a line if your'e not sure.