307 Xsi 2Litre Petrol Clutch

[tidypug 5 2 Cars]

Hi all, I think I'm putting this in the right forum, even though its a 307.

 

The release bearing was getting rumbly and sending a shudder through the whole car when the clutch was pressed. I knew I was going to have to change it but it failed on friday before I got chance, so this weekend I've dropped the box off to find the release bearing in pieces. The problem I have is that the bearing has worn through a piece that slides up and down the input shaft on the box.

 

Can anyone still get onto the peugeot tool box website ? I'd like to look at the clutch mechanism to see what I'm going to need. I guess it will be a dealer only part.

 

 

 

Thanks

Jamie

[welshpug 1,661]

Anyone and everyone can get onto servicebox. http://public.servicebox.peugeot.com

 

Not a dealer only part, it'll be about £20 from most motorfactors, its the input shaft seal carrier/clutch release bearing guide, neat auto's have them on ebay.

 

edit,Neat have them ruddy cheap at the mo! http://www.ebay.co.uk/itm/CLUTCH-GUIDE-BUSH-GEARBOX-SHAFT-SEAL-CITROEN-C2-C3-C4-C5-C8-C15-210535-OEM-/370657820849

 

However the shuddering could still be there, given you have the box off I would replace the clutch.

 

You have a BE4R gearbox btw, and afaik a solid flywheel, none of this Dual mass crap

[pugpete1108 62 1 Cars]

beat me to it.....what a suprise

[tidypug 5 2 Cars]

Nice one thanks for that, I've got a new clutch already as the release bearing is buggered.

[Henry Yorke 269 3 Cars]

You have a BE4R gearbox btw, and afaik a solid flywheel, none of this Dual mass crap

 

Were there dual mass flywheels on petrols? I thought they were just a diesel thing

[S@m 156]

210535 - £14 plus vat at a dealer but can be had for cheaper elsewhere as welshpug mentions.

[tidypug 5 2 Cars]

Looks like the release bearing has damaged another piece, I've joined servicebox but can't see a schematick for the clutch.

Its the plastic locating clip that goes over the above part and clips the release bearing onto the clutch arm. Can anyone help me with this?

[welshpug 1,661]

sounds like part of the release bearing.

[tidypug 5 2 Cars]

Thats what I thought too but the piece seems totally different to the new one, perhaps they've changed the design. I'll have a better look tomorrow