Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
jamie_1992

Gti6 Wiring Help Needed

Recommended Posts

jamie_1992

im convertion my 1.9 gti to gti6 engine

 

i have got my loom converted by miles, iv plugged the loom in and nothing is happening, no dash light nothing when the key is turned nothing the car is dead so im thinking i have gone wrong somewhere and im hoping there is someone that can help me

 

il start by asking what sensors i have that i dont know there or what they do

 

IMG_05301.jpg

 

IMG_05311.jpg

 

this comes out with the plug that gose on the oil preasure sensor

 

IMG_05401.jpg

 

IMG_05421.jpg

 

 

some help on what these are and where they go

Share this post


Link to post
Share on other sites
jamie_1992

secondly i need to make sure i have all these on the right places

 

the green i assume is an earth and so is the other black one that i think is new

 

IMG_05321.jpg

 

this is how i put them on the gearbox along with the main earth cable from the battery

 

IMG_05341.jpg

 

the earth strap also earths on the body

 

IMG_05351.jpg

 

is all this correct

Share this post


Link to post
Share on other sites
jamie_1992

is this the starter motor wire i think it is but not sure

 

IMG_05371.jpg

 

i also want to cheak i have the power to the loom correct

 

this is the live from the battery come off the starter and the live in for the loom

 

IMG_05451.jpg

 

i have put them on the alternator like this

 

IMG_05461.jpg

 

so i first need to confirm i have all on correct then try to work out why nothing is working

 

HELP NEEDED PEOPLE!!!!!!!

Share this post


Link to post
Share on other sites
EZ Tutty

First brown plug looks like the one for the evap solenoid iirc (not important), I think some of the crimp on female spades maybe for the dash, but you'd be best off getting the multimeter out and tracing them if you can't find any wire numbers..

Edited by EZ Tutty

Share this post


Link to post
Share on other sites
Miles

Brown plug is the carbon canister valve, Blue and White are the coolant temp and high coolant temp (replace the 306 ones with the 205 ones as they give the original readings), Grey is the oil pressure sender, but you need to get one of these either a S16/XSi type or a adaptor as in my shop,

 

ECU power is right, the battery lead will go from the Batt to Starter then to the Alt, hard to tell in those pics, the cable normally for this runs behind the main engine loom thru the broken tie on the Alt, You will see a round hole in the metal plate on the engine for it

Share this post


Link to post
Share on other sites
Paul_13

Have you given the shunt box a 12v feed?

Without this the fuse board will have no power, hence no dash lights

Edited by Paul_13

Share this post


Link to post
Share on other sites
jamie_1992

What is a shunt box? Any how is the best way to check live to it

Share this post


Link to post
Share on other sites
allye

Black box bolted to the passenger side behind the head light, should be connected directly to the battery

 

shunt-1.jpg

Share this post


Link to post
Share on other sites
dcc

earths are in wrong.

Share this post


Link to post
Share on other sites
dcc

you need to earth the chassis leg aswell.

 

hth

Share this post


Link to post
Share on other sites
Miles

The small earth goes to the body, via the battery tray your relying on a earth thru the paint

Share this post


Link to post
Share on other sites
jamie_1992

Are both the 2 ring terminals both earths and are the ok to be bolted in the same place or is one to go into the chassie

Share this post


Link to post
Share on other sites
jamie_1992

Ok so I have found 2 yellow wires that come from the loom out the back of the fuse box and connected them to positive and it's put all the lights on the dash is this correct?

Share this post


Link to post
Share on other sites
dcc

oh gawd. have a read of the wiring guide on here before you fry something... :)

Share this post


Link to post
Share on other sites
ORB

To be fair DCC, he's just looking for clarity. Probably to stop him from frying something!

 

And, there is not a comprehensive guide to the wiring on here as far as I can see?

  • Like 1

Share this post


Link to post
Share on other sites
dcc

There are many comprehensive guides to wiring all common types of engines!

 

None of which say connect 2 yellow wires to the positive of the battery terminal!

 

Im not trying to be funny or rude - but read the wiring diagrams, make sure you have your wire numbers

 

FYI you only need 2 ve+, an earth and fuel pump wires to make these engines run. gauges etc are all separate really.

Share this post


Link to post
Share on other sites
jamie_1992

It's runs!!!!!

 

Those yellow wires are earths I relise that thanks

 

The reason I was having all this trouble was there was not power going to the little black box on the grill

 

So thanks for the comments

 

All the wiring diagrams I have found tell you how to wire up the multi plugs and not what I was looking for

Share this post


Link to post
Share on other sites
jamie_1992

It's runs!!!!!

 

Those yellow wires are earths I relise that thanks

 

The reason I was having all this trouble was there was not power going to the little black box on the grill

 

So thanks for the comments

 

All the wiring diagrams I have found tell you how to wire up the multi plugs and not what I was looking for

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×