Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
vtifan

Will These Wheels Fit A 205

Recommended Posts

dave richards

Henry nimrods on the front of my 205 have no spacer at the minute and clear the strut

Share this post


Link to post
Share on other sites
Henry Yorke

Henry nimrods on the front of my 205 have no spacer at the minute and clear the strut

1.6 hub? Are they 206 Nimrods or the 406 version (Ouragons?) as they look the same with different offsets

Share this post


Link to post
Share on other sites
dave richards

1.9 et28 so 206gti as far as i am aware i have to use a spacer on the rear axle to create clearance in order to fit though

Edited by dave richards

Share this post


Link to post
Share on other sites
welshpug

yes, 100% henry.

 

PICT0372.jpg

 

had a 3mm spacer on the back to clear the trailing arm as they had chunky sidewalls on one pair

Share this post


Link to post
Share on other sites
Baz

That's not a 205... ;)

Share this post


Link to post
Share on other sites
welshpug

same hubs!

Share this post


Link to post
Share on other sites
Henry Yorke

So fronts fit and rears need a spacer, unless you have a 309 beam as it is wider.

 

The fronts will sit in about 10mm more than 1.9 wheels I guess due to the offset.

Share this post


Link to post
Share on other sites
pug_ham
So fronts fit and rears need a spacer, unless you have a 309 beam as it is wider.

The 309 rear beam might still need a small spacer depending on the sidewalls / tread, Mei needed a 3mm one for them to clear.

 

g

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×