dirtdog 4 Posted November 10, 2012 Right.sorry if this has been covered but i'm confused. I while ago I bought and fitted a 306 3rd / high level brake light after reading a members post saying the ph2 tailgates already had the mounting for them. Much to my dismay mine wasn't the same. I had to drill two holes and attach it with screws. My car is a L reg '94 STDT so I thought it would be PH2. It's got clear lights, the PH2 rear clusters, and there is not much metal on display like my F reg (PH 1?) did along the tops of the door card etc. It's made me wonder if it's a 1.5 or even a 1.75 lol I had a spoiler on the PH1 which was bonded to the glass which I belive is the phase 1 spoiler. Now after having a read up about the phase 2 spoiler it seems that it's screwed/bolted down onto the tailgate itself and nothing touches the glass? Looking from inside and underneath my tailgate/bootlid I can only see one hole with a clear plastic insert which looks to have a thread. Sure I have read else where there are four?! I don't think it's the ph1 spoiler i need..but i'm a little dubious with the ph2 one Share this post Link to post Share on other sites
allye 530 3 Cars Posted November 10, 2012 your car is certainly a phase 2 item, you are also right about the later spoiler being screwed on with 4 screws. I'm certain it was only the very late cars that had the mounting point for the high level light. When my Rallye's rear got repaired from a shunt the new genuine Peugeot boot had the mounts for it. Stick a photo up and we can soon tell. Not out of the question a phase 1 boot has been fitted for one reason or another. Share this post Link to post Share on other sites
Anthony 1,002 Posted November 10, 2012 There's five holes in the Phase 1.5 and 2 tailgates that plastic inserts sit in and in turn the OE spoiler screws into. Base model tailgates do not have the holes. As Ali says, it seems that only late Phase 2 tailgates have the holes for the 3rd brake light - neither my '92 J or '92 K reg cars have it for example. Share this post Link to post Share on other sites
chipstick 382 1 Cars Posted November 10, 2012 I'll have to check the '93 tailgate I have for these mountings. Share this post Link to post Share on other sites
BERTMAN 40 1 Cars Posted November 10, 2012 Were talking really late phase 2s. My 96 on a P plate diesel has the holes for mounting Share this post Link to post Share on other sites
allye 530 3 Cars Posted November 10, 2012 this what the mount point looks like Share this post Link to post Share on other sites
dirtdog 4 Posted November 11, 2012 Yea that's the mounting for the brake light allye? I don't have the flat sections nor holes.. It was just the ridge all the way across. I'll upload a picture of mine soon. So anthony...you're saying I have a base model tailgate? Wouldn't suprise me really..although I always thought it would be a GTi item. Can i fit the ph2 spoiler to my boot then? Bit of persuasion? Share this post Link to post Share on other sites
dirtdog 4 Posted November 11, 2012 You can't really tell but..I didn't have the flat sections to mount the 3rd light. I just drilled and screwed into the ridge..if you get me. It's the bit under the brake light that i'm wondering about. The little clear round plastic plug in the centre of the boot / between hinges Share this post Link to post Share on other sites
Anthony 1,002 Posted November 11, 2012 So anthony...you're saying I have a base model tailgate? Wouldn't suprise me really..although I always thought it would be a GTi item. I don't think STDT's have a rear spoiler, and if that's the case, then they'll have a base model tailgate. That's my old STDT and as you can see, no spoiler on that, nor from memory any of the others that I've seen. Share this post Link to post Share on other sites
pug_ham 243 3 Cars Posted November 15, 2012 The STDT never had a spoiler of any kind on the tailgate originally & mine didn't the holes for the plastic inserts to fit one. The STDT has the basic hatch with the tinted glass, base models generally have clear / plain glass without any tint. g Share this post Link to post Share on other sites
Gman 29 Posted November 15, 2012 Mine has the holes, but is on a 92 plate Share this post Link to post Share on other sites