Installation Powersystem Box

[nour_peugeot 5 1 Cars]

hey every body

 

i need your help ... i got the power system box and i have't diagram manual to Install it

 

in my peugeot 306 with 2.0 16 v engine xu10j4r

 

and i search for it and i found nothing

 

if any wan can help me by tha map or diagram or montage

 

thanks

 

[welshpug 1,657]

Err, what is it and what does it do?!

[dcc 855]

who is your daddy, and what does he do?

[Miles 331 1 Cars]

By the looks of it you;ve been had by the old resistor chip in a box, just makes the car overfuel

[matyasg 0]

OMG, 380EUR!?!

take it back and ask for a refund..

[petert 586]

Fairly sure he's taking the piss out of you.

[S@m 156]

Heres the so called install instructions which confirms our suspicions;

 

http://www.powersystem.fr/UK/installation.php

 

Just some kind resistor to cause overfuelling.

 

Sam

[calvinhorse 870]

Phwoooooar! They put it in a box!

 

I think it goes up your ar..........s...... .. .

[nour_peugeot 5 1 Cars]

it's like a chip

 

 

Power Ch 13 max. Couple + 2 million kg max. N / m + 20 Nm Type of connectors Solder With SFI module + 8 Ch max

and i can't get it back coz i leave in egypt so hard to back it

 

and i don't know how to install it .... there wasn't and thing about install in website

[welshpug 1,657]

[Miles 331 1 Cars]

This is what the inside may look like, http://www.ebay.co.uk/itm/TUNING-CHIP-Peugeot-Skoda-105-106-107-205-206-207-406-/260951104839?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3cc1e5dd47

[nour_peugeot 5 1 Cars]

it's like this

[James504 12]

This is what the inside may look like, http://www.ebay.co.u...=item3cc1e5dd47

 

Its very worrying that they have sold 64! One born every minute.

[nour_peugeot 5 1 Cars]

so what can i do now ?

[d7ve_b 44 1 Cars]

Lay the back seats flat, it'll help maximise the effect of this mod.

[dcc 855]

send it back...

[nour_peugeot 5 1 Cars]

i got the install map

 

and soon i will test my can by dyno

 

but now i looking for upgrade my engine

 

thanks guys

 

[welshpug 1,657]

please don't!

[EZ Tutty 7 1 Cars]

on XU10J4R bosch engine management....

Pin 25 - Coolant Temp Sensor

Pin 2 - Earth

Pin 29 - Throttle Position

Pin 27 - Intake Air Temp Sensor

 

I personally wouldn't bother, it's a generic IC inside the unit which is just adding offsets to the CTS, TP & IAT sensors 'tricking' the ECU into running differently, it's almost completely random and could potentially cause damage to your engine, the proper way of doing this is a tried and tested remap from a reputable company.

Edited November 6, 2012 by EZ Tutty

[GLPoomobile 958]

I wonder how many times somebody has to be told not to do something silly, when they've already invested wasted several hundred euros on a bad decision

 

Perhaps we could formulate an equation about this

[petert 586]

Donate it to the forum and get an electronics guru to pull it apart and publish findings.

[wicked 103 3 Cars]

Probably it will mimic a lower inlet temperature and lower CTS at higher loads, to increase fueling.

Maybe also mimic a lower load index to advance ignition and compensate the fuel with the sensors above.

 

But for 380 euro, total rip-off...

If you want to play with sensor data, better buy a Apexi s-afc, that allows you to program it your self and mod the MAP sensor data as well.

[nour_peugeot 5 1 Cars]

guys i try it now and before power system

 

before power system i got 0-100 in just 9.2 sec

after power system i go it in just 8.5 sec

 

in the same road and same time

 

any one think i will got a problem in my engine ?

[omega 82]

i think a old english saying comes to mind

 

 

flogging a dead horse.

[Miles 331 1 Cars]

Yes, even with bad remaps you can have engine issue's, Mind each day and every run you do you will end up with different times