Tu24 Head

[custard-rallye 25]

Hi have bought a 205 with a tu24 head and 40's it has the std inlet with the rubber mounting for the 40's the rubber mount is perished and drawing in air and body know where I can get a new one

[welshpug 1,661]

http://stores.ebay.co.uk/FAST-ROAD-CARS-LIMITED?_trksid=p2047675.l2563

[custard-rallye 25]

I couldn't find maybe I didn't explain the bit I mean properly

 

[205Rallee 59]

I've got 2 sets of them in my garage, think they are about £300 each for new ones if you can get hold of them. Mine have the usual light cracks in the external rubber but no holes. I swapped mine for the solid alloy ones made by Chadil along with the misab plates and misab rubber washer mounts circa £160 for the mounts and £30 for all the misab bits from the e bay store mentioned earlier in the thread.

[trogboy 17]

Try Euro Carb Ltd in Reading.

 

A few years back they were buying in pairs of 40 DCOM carbs as new old stock from Weber complete with these anti vibe plates and selling the carbs on separately. AFAIK these plates were only used on the euro rallye and the AX sport, possibly a few Alfas?. Any how they may have a few sets kicking around still.

 

Ad

[custard-rallye 25]

^^^^ cheers

[205Rallee 59]

Having had sets of both, the AX ones were for the Dellorto carbs they came with and the rubber mounts were not as thick as the 205 Rallye ones, as the AX had clearance issues between the carbs and the bulkhead, but both fit the DCOM's.

[trogboy 17]

That's interesting. Did the AX Sport use trumpets at all? I have a plenum from one sitting in the garage and it seems to be too shallow for even the short trumpets used on the TU24.

 

Back on topic - Euro Carb definitely had the mounts for the TU24 as I bought a pair whilst I was picking up the rebuild kits for my DCOMs. IIRC I paid £30.00 for them!

[christopher 5 1 Cars]

The AX sport had no trumpets and 32 chokes compared to the 34 rallye ones. The air box was very think so no room for the trumpets.

 

I have also have a set of the alloy replacement gaskets with standard weber vibration pads for the dcoe.

 

Good investment, they fit better too since they match a bit better to the manifold. Although just in front of the jet I'm not sure it makes much difference. I think you can get them from BPS in France. Mine came from a head I bought once.