How To Tight A Nut On Gaz Coilovers?

[Dariooo 5]

Helo

 

I had buy a gaz coilovers on Group Buy. I had assemble it and I don't know how to tight a nut on the top on rod. The problem it's because I can't fix a rod and when I would tight a nut, they rotate toghether. How had you resolve this problem?

 

Thank you

Dario

[max0 5]

Is this the top nut? where on the standard strut you can use an Allan key to hold it as you tighten it? I had to borrow a cheap battery powered impact wrench

[Liquid_106 97 1 Cars]

Picture speaks a thousand words:

Might need a 'swan-neck' spanner to fit in the top mount?

[Dariooo 5]

yes, the top nut which fix the bearing and the top mount. On gaz I can't use a Allan key because it's some nut to adjust the hardnes.

[max0 5]

Yeah you need an impact wrench which does the nut up really quickly, it caught me out as well

[Dariooo 5]

Oke...I will try with pneumatic Impact wrench.

 

Thank you

 

PS:

I have like this:

[max0 5]

Yeah that brings back memories lol. What lb springs are you using?

[Liquid_106 97 1 Cars]

yes, the top nut which fix the bearing and the top mount. On gaz I can't use a Allan key because it's some nut to adjust the hardnes.

Sorry, didn't realise

 

Install guide says to use a windy gun, so guess that is the only option!

[welshpug 1,646]

There's small spanner flats on there if they are as per your picture, use those.

[Dariooo 5]

I can't use spanner flats because I must tight before a nut for 10 screws or more.....

[blandy 29]

Ive just fitted my gaz gha's and the adjuster in the center seems to sit pretty high and the bonnet nearly fouls on it, is this normal