Advise On Panel Sealent

[harryskid 193]

As title what sealent do you guys use after fitting panels,?. thanks in advance.

[harryskid 193]

As title what sealent do you guys use after fitting panels,?. thanks in advance.

 

As an after though is it needed, i am talking about inner wings and front panels ect?

[Alfie 6]

Try Sikaflex Harry. Good stuff, you can almost stick the panels with it Lol. And you can overpaint it!

[harryskid 193]

Thanks for the advice Alfie i'll give it a try!

[deathbringer929 49 1 Cars]

3m spray sealer but used in a normal mastic gun. its very soft so brushes over lovely. tiger seal's good but doesn't brush out as good as the spray sealer.

[matt.f 16]

3m and Wurth sealer is pretty good.I would seal where the panels meet,rub it in then wipe it out straight away if you dont want to see it.Pre-clean/panel wipe is good for this

[DamirGTI 342]

Ditto .. PU Wurth sealer (it stays on flexible , never hardens never cracks .. like a some kind of rubber mass ..)

 

Just , never ever use over bare metal ... always epoxy or zinc prime first , then apply sealer (also , if using acid/etch primer as a base on bare metal avoid applying sealer on top cos the acid will lift the sealer off ..)

 

Damir