Megasquirt

[cammmy 1]

Hey Guys

 

Does anyone have experience with MegaSquirt? I'm looking at using it on the Trump (for the charged RV8 i'm planning to put in it), the BX 16v (as I'm getting a set of quad bodies), and also the 4bie (i'm planning to charge it but I think the car would go better/faster with a proper EMS in there anyway)

 

I need some help choosing all the bit's I will need. For the pug I'm thinking

 

MSIII

 

http://www.diyautotune.com/catalog/megasqu...case-p-419.html

 

MAP sensor with barometric correction upgrade

 

http://www.diyautotune.com/catalog/mapdadd...tion-p-117.html

 

Intake air temp sensor

 

http://www.diyautotune.com/catalog/gm-open...ctor-p-116.html

 

Coil on plug x4 (Do I need to use something like Bosch BIP373 with these?)

 

http://www.diyautotune.com/catalog/ign1fd-...coil-p-428.html

 

Wiring Harness

 

http://www.diyautotune.com/catalog/1239-me...ready-p-43.html

 

I will be using a wide band lambda sensor and already have a throttle position sensor (Also have instructions on making a digital AFR display).

 

What else will I need to go distributorless ignition? Hall sensor (inlcuded with the MSIII? "•Hall Sensor/Coil(-) and VR Sensor Ignition Trigger Components")

 

The crank sensor and coolant sensor can be re-used?

 

I have only a very limited idea of what I need/am looking at/am doing so would greatly appreciate if anyone who has experience with this could help me choose the components I need.

 

Ta

Cam

[JeffR 51]

Cam, talk to Graham Wallis on the Aussiefrogs forum. He has a good deal of experience with MS.

[cammmy 1]

Thanks, have re-registered. Seems like everyone who joined after 2006 got deleted