Mi16 4x4 Exhaust

[christopher 5 1 Cars]

Does anyone know if it is possible to get a standard exhaust from a Mi16 4x4 anywhere??

 

Are there any OE or aftermarket manufacturers that will supply these?

[Jer309GTi 3]

I've just had a look on the Bosal website, and they don't even list one. This has cropped up a few times on here, think they are very hard to get, if not impossible, new now. Probably the best bet I'd say is to get one made up at a custom exhaust centre

[KRISKARRERA 2 1 Cars]

The back box for the Mi16x4 occasionally pops up on ebay.

[AlexN 7]

I bought a new downpipe from Eurocarparts, never fitted it, but I have sold it now. It was a few years ago and cost quite a bit if I remember rightly. It might be as well to get a custom exhaust made.

[tad 1]

i work at kwik fit and we use ces exhausts unsure on phone number as off work at mo with broken finger they are really good with oddball and old stuff

http://www.cesuk.com/index.php?option=com_...ge&Itemid=1

[christopher 5 1 Cars]

Thanks. Thats just what I expected since I couldn't find it anywhere in UK or anywhere else. Pretty impossible to find. I was keeping my eye on a genuine backbox on e-bay already

 

So I just bought the backbox from e-bay . An my local peugeot was able to get probably the last (in Denmark) centre section. The middle section actually has a PSA number on it. Is that peugeot sport by any chance..?

 

 

 

[KRISKARRERA 2 1 Cars]

No it stands for Peugeot Société Anonyme.

[tad 1]

No it stands for Peugeot Société Anonyme.

http://www.cats-direct-shop.co.uk/exhaust-...p?recordID=2187

try there

 

[imaS 0]

I bought mid and end sections a couple of years ago. If I remember correctly, they were made by companies Redi and Bosal.

[Baz 421]

I still have a few good condition 4x4 bits i wouldn't want a lot for Christopher, including some Scorpion stainless bits iirc. Let me know if you're interested.

[christopher 5 1 Cars]

I still have a few good condition 4x4 bits i wouldn't want a lot for Christopher, including some Scorpion stainless bits iirc. Let me know if you're interested.

 

 

Baz PM sent

[Furio 0]

Does anyone know if it is possible to get a standard exhaust from a Mi16 4x4 anywhere??

 

Are there any OE or aftermarket manufacturers that will supply these?

 

About 6 months ago I bought the centerpipe and back box for my mi16x4 - original peugeot parts. There was a dealer in CPH who had the center pipe, and i got the backbox fra PSA/ France thru may local dealer.

 

Part no. 1728 77 and 1726 40

Edited June 8, 2010 by Furio

[cammmy 1]

Would it be easier/cheaper just to have the bits made up at a local exhaust centre?

[Furio 0]

Would it be easier/cheaper just to have the bits made up at a local exhaust centre?

You might be right, but I haven't found anyone who could find or make the parts. Besides I like things that fit propperly without too much fiddeling.