Changing Heater Matrix - How Hard A Job?

[KRISKARRERA 2 1 Cars]

... on a phase 1 405?

 

Please let ir be easy!

[Sloppy 0]

a can be time consuming, BUT if you cut a small bit of dash the runs under the glove box it makes the job SO MUCH easyer, does not effect the actual fabrics of the dash its just a little ali bar that can be riveted back on afterwards.

[Guest badboyracer3500]

Got mine out without cutting dash, took me about 1/2 a day as couldn't remove 1 of the pipes, it was jammed solid. Did remove glove box though.

[Miles 331 1 Cars]

Are A/C car's allot harder, I know the 306 that is the case

[KRISKARRERA 2 1 Cars]

Well from what I've seen on my 405 it looks the same. I'll be doing those seals tomorrow. Wait for the swearing!

[Bluegalaxy1056 0]

I removed all the dash to do mine. But relised when putting the dash back in if you remove the glove box totally and unbolt the dash you can flex it enough to remove the matrix.

 

It is deff easier than removin the dash which is a pain and i have still got a anoying rattle from doing it