Mi16 D6c W/inlet Cam

[Guest Avia]

I'm talkink about the catcam inlet cam.

 

other then that the engine is stock, what crank numbers can I expect?

 

thanks.

[ryan13961345402285 1]

Ask PeterT on here or on Aussiefrogs.

Here's his site:

 

http://www.taylor-eng.com/xu9j4/16v_camgrinds.htm

[Jer309GTi 3]

Hi Avia, what do you mean by 'crank numbers'?

 

Can you enter your location into your profile please

[Guest Avia]

Crank numbers = bhp = flywheel hp

[Guest Avia]

I mean crank hp (flywheel hp/bhp)

[petert1345402284 0]

other then that the engine is stock, what crank numbers can I expect?

<{POST_SNAPBACK}>

 

That depends on whether you have the DFW (9.5:1) or D6C (10.4:1) version. If the DFW, you're cam choice is limited by the compression. There's some good info about this on my website.

[Guest Avia]

It's the D6C...

 

On the website it says you can get 180-185 hp (whp or bhp?) on the d6c with an inlet cam' higher CR and a re-map...

 

I wanted to know what can I get with the inlet cam alone.

 

thanks.

[petert1345402284 0]

With just the inlet cam you'll get around 92kW at the wheels. That equates to around 170hp at the flywheel.