Rippthrough 98 Posted June 28, 2006 (edited) Hi, my front seats in the 306 are a bit worse for wear, always liked the shape of the 405mi16 seats, seem to made for my shape, so I was wondering if I can fit the seats from a 405 into a 306. Obviously the rears will take a lot of work, but are the fronts relatively simple? -Phillip (Glynn's son) Edited June 28, 2006 by Rippthrough Share this post Link to post Share on other sites
Jer309GTi 3 Posted June 28, 2006 I would have said they should fit ok. I've never tried but looking at our 306 DTurbo and my 405 Mi, the seat bases/subframes look very similar. As long as the 306 is a 5 door I would think you should be ok (as if your 306 is a 3dr you won't be able to tilt the front seats to get in the back) Share this post Link to post Share on other sites
Jer309GTi 3 Posted June 28, 2006 As for the rears, you could get the 306 rears retrimmed to match the 405 fronts Share this post Link to post Share on other sites
Rippthrough 98 Posted June 28, 2006 As for the rears, you could get the 306 rears retrimmed to match the 405 fronts <{POST_SNAPBACK}> Yeah, that's not a problem, car is a 3dr though. No chance at all of working something out so I can still use the tilt? Share this post Link to post Share on other sites
Jer309GTi 3 Posted June 28, 2006 If you could use the subframe from the 306 it will still have the tipping facility, so you could fabricate a bracket of some kind to fix to the subframe tipping mechanism. Share this post Link to post Share on other sites
Rippthrough 98 Posted June 28, 2006 Cheers, might have a go and see! Who has an full interior going cheap Share this post Link to post Share on other sites
Jer309GTi 3 Posted June 28, 2006 There was a couple of cloth sets on eBay last time I looked Share this post Link to post Share on other sites
Rippthrough 98 Posted June 29, 2006 There was a couple of cloth sets on eBay last time I looked <{POST_SNAPBACK}> Could do with the rears as well - bit difficult to get matching material! Anyone ever gets a cloth interioir going cheap give me a PM. I shall update this thread if I ever manage it. Share this post Link to post Share on other sites