Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Guest Spike

Grade Of Oil For The X4 Transfer Box?

Recommended Posts

Guest Spike

Simple question really... need to top the the transfer box on a mates M16x4 I have no idea what grade of oil to use as it's not covered in the Haynes manual and he doesn't have a handbook... What's recommended?

 

Cheers

 

Spike

Share this post


Link to post
Share on other sites
petert1345402284

very special stuff. I'll have to look it up. I have some in the shed.

Share this post


Link to post
Share on other sites
cybernck

hmm i thought i had repied to this already :huh:.

 

 

anyway, you need 80W90 differential oil, syntethic would be good as it

absorbs the heat better and gives a little bit less transmission losses

than mineral oil.

 

or better yet, 75W140 - i use Castrol SAF-X.

 

post-1-134540317733_thumb.jpg

 

 

p.s. don't mix the oils (if you meant that with "top it up"), but replace it

completely - you'll need a bit under 2 liters - 1.8 iirc.

 

 

hope this helps.

Share this post


Link to post
Share on other sites
Tony1345402284

Don't fill the transfer box above the lower level mark on the dip stick.

 

Anymore than this and it can blow oil out the dipstick tube which then runs down onto the exhaust...and can catch fire.

Share this post


Link to post
Share on other sites
Baz

Glad this topic has come up, was thinking the same thing the other day!

 

You may have replied in the Gearbox oil thread Nik?

Share this post


Link to post
Share on other sites
Sign in to follow this  

×