405 Mi16 Pictures

[kenny1345402284 0]

Hehe. Thanks I was "Lions don't hibernate in Winter", but I had to change it since mine actually is parked this winter

[TonyW 0]

And here's a couple pictures of mine ...

 

 

[Jer309GTi 3]

Mmmm shiny Very nice

[KRISKARRERA 2 1 Cars]

Tony - U BASTARD! I want it now!

 

Jer - see that pic of Tony's car, if i draw an imaginery line following the chrome trim over the wheel/tyre it's higher than mine.

[KRISKARRERA 2 1 Cars]

Like here:

[TonyW 0]

She looked shiny then coz she was sitting at my grandfathers for a couple of weeks before i could get my hands on her, its what he did for a living! But she looks even shinier now, i'm off work with a severed tendon so have given her a full body going over to make her look her best!

 

How low is yours then Kris? I'm looking to lower mine by 30mm all round when i can get my hands on some springs and sort out somewhere to get the rear end done at the same time.

[Guest badboyracer3500]

Tony - U BASTARD! I want it now!

 

Jer - see that pic of Tony's car, if i draw an imaginery line following the chrome trim over the wheel/tyre it's higher than mine.

<{POST_SNAPBACK}>

 

 

 

Meaning what (chrome trim)????

Don't this mean your car is just sitting lower?

My PH2 actually sat higher than my PH1, i prefer it that way, low and mean

[KRISKARRERA 2 1 Cars]

Yeah I'm sorry Gav, I shoulda PM'd Jer about this rather than posting in this thread. He and I have been discussing my ride height via PM (I've put the standard springs back on the front of my car and I'm trying to figure out by how much the rear was lowered).

[Jer309GTi 3]

Tony - U BASTARD! I want it now!

 

Jer - see that pic of Tony's car, if i draw an imaginery line following the chrome trim over the wheel/tyre it's higher than mine.

<{POST_SNAPBACK}>

 

Ah I see. The ride height on Tony's phase 2 seems a lot higher than mine, but then Gavin has said his phase 2 sat higher than a phase 1. Must be harder springs maybe as the phase 2 is heavier?

[Guest badboyracer3500]

Jer - see that pic of Tony's car, if i draw an imaginery line following the chrome trim over the wheel/tyre it's higher than mine.

<{POST_SNAPBACK}>

 

Ah I see. The ride height on Tony's phase 2 seems a lot higher than mine, but then Gavin has said his phase 2 sat higher than a phase 1. Must be harder springs maybe as the phase 2 is heavier?

<{POST_SNAPBACK}>

 

 

 

 

 

Couldn't it be due to ph1 being older than ph2, therefore ph1 springs are worn and car sits lower??

Gavin.

[Mr Teflon 1 1 Cars]

 

AVO adjustable dampers/lowered springs, reset rear beam to match, Brembo Group N discs and DS2500's front, OEM rear discs/pads, braided hoses, Toyo R888's, OEM bushes, drop links, bottom arms, ball joints, brake pipes, K&N panel and HT leads - all new kit.

 

And a damn good valet/mop/polish and 12 months ticket.

 

 

Next stop - The Ring, Easter

[TonyW 0]

VERY nice!!!

[calvinhorse 870]

mr teflon- that looks awesome!

[Jer309GTi 3]

That is seriously tidy How much lower are the springs than standard?

[Mr Teflon 1 1 Cars]

Cheers Fellas

 

Apparently a 30mm drop on the front, rear adjusted to match. The grip is there but I'm going to have to play with the damping before I'm happy.

 

There are a few stonechips on the front, and there is a dent in the bootlid (I've got a mint replacement lined up) but on the whole the lads who did the car did a good save with the paint!

 

All I need now is some headlamp washer assemblies ............

[cybernck 402 1 Cars]

wow, that's stunning!

[Borntobewild 1]

Thats a nice mi16! Love to see a movie or images when you go to the ring!

[Mr Teflon 1 1 Cars]

Thats a nice mi16! Love to see a movie or images when you go to the ring!

<{POST_SNAPBACK}>

 

Hhhmm - you've just reminded me to wire in the bullet cams before I go

[Bozi 0]

lack of power? : http://koti.mbnet.fi/bozi/temp/holsettiloita.jpg

[Borntobewild 1]

Could try this:

Compressor 240 bhp

[Jer309GTi 3]

Could try this:

Compressor 240 bhp

<{POST_SNAPBACK}>

 

I want it!!

[kenny1345402284 0]

Just bought myself an new car for work

 

[Jer309GTi 3]

I reckon that looks nice Kenny The front grille doesn't look quite right though....

[TonyW 0]

Is it an Ecosse one maybe? I seem to remember looking thru their website for one and it just doesn't seem to fit the gap? Looks good tho Kenny, little bit of touching up here and there and some polish, minter :D

[Borntobewild 1]

Nice rims