Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
MiniGibbo

No Indy Or Repeater.

Recommended Posts

MiniGibbo

As above I've lost the passenger indy and repeater..

 

What do we reckon bulbs or something more sinister.?

Share this post


Link to post
Share on other sites
EZ Tutty

In the engine bay follow the wiring back from the offending indicator, it should go to a plug with another set of wires coming off the same side (for the side repeater), and a single pair on the other side (feed from the indicator relay), usually it's this pair of plugs that cause the problem, trying cleaning them, or better yet do what i did and just chop the plugs out and solder the wires together.

 

The only reason this pair of plugs is there at all is due to the fact some 205's didn't have side repeaters and rather than modding the loom they made an additional mini 'link' loom to run the side repeater.

Share this post


Link to post
Share on other sites
Baz

They're on the same circuit so you'll lose both if one's dead iirc.

 

Probably just iffy/corroded connectors.

Share this post


Link to post
Share on other sites
welshpug

if youve lost both it'll be the sub-loom connection just behind the headlamp, brown two slot plug.

Share this post


Link to post
Share on other sites
MiniGibbo

Cheers lads I'll have a look when I get chance..

 

What is it with old French cars and earthing problems LOL

Share this post


Link to post
Share on other sites
pug_ham

Whenever this happened on my cars its been the brown connector near the headlamp dragging the earth down.

 

Strangely, sonce re-doing the headlamp panel earth points to all ring terminals on the bolt, it hasn't happened again.

 

g

Share this post


Link to post
Share on other sites
MiniGibbo

Yeah I've just had a look and made sure all the plugs where pushed in and none of the wires have snapped.

 

Hasn't fixed it and that's as far as my wiring talent goes lol..

 

Back to miles the car will go.

Share this post


Link to post
Share on other sites
welshpug

pull the plug apart, clean terminals, push back together giving it a damn good wiggle as it goes.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×