Help With Engine Sensors, And 4 Stray Wires On Ecu Loom

[Jim Slim 0 1 Cars]

Could anybody please tell me what these sensors are and these stray 4 cables please?

 

http://s1145.photobucket.com/albums/o509/Jim-Slim/

[Anthony 1,003]

From top to bottom:

 

Oil pressure guage sender

High coolant temperature switch

Low oil pressure switch

Coolant temperature gauge sender

Oil level sender (not used on 205 conversions)

 

Wiring I can't make out in the tiny picture, but will likely be the alternator, starter solenoid, oil pressure gauge and low oil pressure switch

[damien 22 1 Cars]

top one is oil pressure and the bottom is oil level.

 

could do with a bigger pic of the loom, what engine is it for?

 

edit - Anthony got there before me, should of refreshed the page first.......

Edited July 18, 2012 by damien

[Jim Slim 0 1 Cars]

hi yeah sorry guys forgot to state that,

 

its a bx loom which has been shortened and re done by miles a few years back!

i have just rebuilt enigine and replaced every sensor and basically everything electrical etc under the bonnet, we noticed as we fed the loom back into the bay that these 4 wires hadnt been connected by the looks of it,

bearing in mind the car was running for a year before i took it out to re do the works, i only had a working speedo, petrol and rev counter in the gauges and wondered if this would be the reason why or if i just had knackered sensors

 

cheers for the help