Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
BlueBolt

Heater Blower... Not The Usual Problem

Recommended Posts

BlueBolt

Ok, so the usual problem is that the blower doesn't blow strong, or that it is intermittent or just plane doesn't work....

 

Started my car up the other day, few days after I had a considerable amount of rain down into the intake due to not putting the scuttle back on properly under the window seal and it raining pretty heavy...

 

Now, my fans are on full blast!! Even though the dial is set to off!!

 

The only thing this is doing is annoying due to the constant full fan noise, but other than that, I can live with it for now, and take the fuse out when ur had enough. Anyone else had this??

Share this post


Link to post
Share on other sites
Tom Fenton

Sounds like you have drowned the resisitor control module that lives in the fan intake housing.

Share this post


Link to post
Share on other sites
chipstick

Have a nosey at the rheostat. 2 screws up underneath the fan.

Share this post


Link to post
Share on other sites
BlueBolt

Stupid question!!

 

Is this the rheostat::

 

8508745A-248E-42A6-BC2B-78719B5D2C06-597-0000004B0B979BA5.jpg

Share this post


Link to post
Share on other sites
BlueBolt

Kewl, thanks

Share this post


Link to post
Share on other sites
1 FAT PUG

think i need to get a new one as mine doesnt blow as strong as my other 205

Share this post


Link to post
Share on other sites
Leet205

Kewl

 

:blink: what age are you?! 13?

  • Like 2

Share this post


Link to post
Share on other sites
Miles

You can fix some of them, normally the tag on the transistor corrodes up, you can just add a piece of suitable cable for a Earth and job done,

Share this post


Link to post
Share on other sites
laldy875

yeah mine did this when the transistor was goosed. randomly went on and off. you can buy reconditioned boards on ebay, but make sure you get the right amount of pins. a five pin worked in my 4 pin ( i think) but it works better with the proper amount of pins. nice and easy job replacing it. probably would be possible to just replace the transistor and order it from cpc/farnell...

Share this post


Link to post
Share on other sites
BlueBolt

:blink: what age are you?! 13?

 

What's wrong with kewl?? I've spelt it that way for years!!

 

You can fix some of them, normally the tag on the transistor corrodes up, you can just add a piece of suitable cable for a Earth and job done,

 

Know what I'm doing in the morning now then!! Least I'll be having a look to see what's possible... Thanks

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×