Gti6 Flywheel Mashed

[Karl 15 1 Cars]

hi all ive had a problem with my 205 gti6 the gearbox blew up on me lol so i whipped it off to find gear sprockets inside the bell housing it was anhilated anyway the clutch was fine but the pressure plate was chewed up and so is teeth that send the signal to the crankshaft sensor so i know i need a new fly wheel and clutch kit any sugestions on either would like to upgrade it really while it is off so i dont have to come back to this many thanks in advance

[allye 530 3 Cars]

The Rich W lightened flywheels (from 306gti6 forum) are very good but quite pricey compared to a few quid for a 2nd hand standard item. Clutch wise as long as the engine is standard a good OE valeo or similar is more than enough.

[harryskid 193]

Am i right in saying an Mi one would fit as well?

[welshpug 1,657]

yeah, its the same flywheel.

[Karl 15 1 Cars]

thanks does the valeo clutch need tobe mi16 or do i need a gti6 1 thanks

[Karl 15 1 Cars]

Am i right in saying an Mi one would fit as well?

yeah i have an mi16 one in at the moment jw if there is a better 1 possibly but the clutchis fine its the pressure plate that is chewed

[welshpug 1,657]

Its usually a push type 1.9 MI16 (BX 16v) clutch that is used

[harryskid 193]

Mine has a Mi flywheel with a Helix paddle clutch!

[Karl 15 1 Cars]

Its usually a push type 1.9 MI16 (BX 16v) clutch that is used

http://www.spoox.co.uk/catalog/product_info.php?products_id=2597&osCsid=daa7c9551552d762af4bbb76fe4dd032

 

will this clutch be ok??

[welshpug 1,657]

yeah, but could save about £35

 

http://www.carparts4less.co.uk/cp4l/c/Citroen_BX_1.9_1991/p/car-parts/car-transmission/clutch-and-associated-parts/clutch-kit/?641545400&1&a9b5ceae2cf92aa9c86c99f3edb3042b65b1578a&000069

[Karl 15 1 Cars]

yeah, but could save about £35

 

http://www.carparts4...65b1578a

 

spot on thansk alot mate dont supose you know of anywhere that does a lightened flywheel for less thn £294

[kee 22]

try TTV racing, will make one to suit your needs and quoted me a lot less than that for a ford xflow flywheel and that was for race spec too.

never used them but heard very good things about their work

[welshpug 1,657]

TTV make the flywheels for Lynx Power engineering, as sold by Rich Walker, so I doubt you will get them much cheaper.

[Karl 15 1 Cars]

got that cluth you showed me welsh pug and got a flywheel off rich w many thanks you guys saved me about 90 golden nuggets much appreciated

[kee 22]

TTV make the flywheels for Lynx Power engineering, as sold by Rich Walker, so I doubt you will get them much cheaper.

 

cut out the middle man and buy straight from ttv will save some pennies, from memory I was quoted around £200, that was about a year ago

[welshpug 1,657]

I dont think they will sell you one direct.

[kee 22]

they certainly used to, like I said I had a quote for a race-spec fly for use on my mk1 fiesta and they never mentioned going through a 3rd party.

theres more in it for them selling direct.

[welshpug 1,657]

They don't do the mi16/gti6 one direct, you have to go through lynx for that one in particular.

 

moist others you can order direct however.

 

 

GTi 6 / Mi16 'Supalite'

With Inductive pulse pick-up

Lightweight billet steel

Single piece design integral teeth

Suits standard diameter clutch

Dynamically balanced

Weight: 4.1Kg

Part number: 0686

Exclusive UK Stockist:

www.lynxpowerengineering.com

Edited July 18, 2012 by welshpug

[kee 22]

very pretty, their work looks very good