Pete C 0 Posted June 29, 2012 Do I use the 406 reservoir that came with the master cylinder or is it better to swap it for the 205 one? Share this post Link to post Share on other sites
Normski 1 Posted June 29, 2012 I used the 205 one as thats what I had. But if the 406 one fits, it wouldn't really matter which you used. Using the 205 set-up keeps things simple as it is a straight swap. I've not seen a 406 res, so I'm not sure how the low fluid warning switch is wired. Share this post Link to post Share on other sites
Pete C 0 Posted June 30, 2012 There's a two pin plug. If I'd have thought about it, I'd have cut the plug off the 406 I took the reservoir from... Share this post Link to post Share on other sites
Alan_M 66 1 Cars Posted June 30, 2012 There's a two pin plug. If I'd have thought about it, I'd have cut the plug off the 406 I took the reservoir from... I think the connector is a 2 pin injector type plug, if you've a gash loom kicking about. Share this post Link to post Share on other sites