Gaz Coilovers

[Iain-gti 6]

Hi,

 

 

I have fitted Gaz coilovers to my car a while ago and im just sorting out the ride height, the rear wheels are level/little bit higher than the rear arches but the front i cant get close. With the coilovers fully wound down the spring is loose and is a pain to seat properly but even then its not level with front arches. Any ideas can fit smaller springs but seating them is going to be annoying.

 

 

thanks

 

 

Iain

[johnnyboy666 195 1 Cars]

how long are the springs? shorter springs might be the only way if the platform is already fully wound down and its not low enough.

 

helper springs should avoid any extra movement when the spring is decompressed

[Anthony 1,002]

Isn't this why you use helper springs?

[Tom Fenton 1,540]

ride height, the rear wheels are level/little bit higher than the rear arches

 

It will handle like a sack of s*it that low. Aim for the wishbones to be horizontal and NOT pointing uphill to the wheel.

[Iain-gti 6]

Ill have a look at the wishbone, where can i get helper springs/smaller springs from i looked on Gaz but couldnt see anything.

Edited June 27, 2012 by Iain-gti

[johnnyboy666 195 1 Cars]

http://www.ebay.co.u...=item2c664363c7

 

something like that

 

although my gaz gha's from the group buy came with a set already on

Edited June 27, 2012 by johnnyboy666

[chipstick 382 1 Cars]

What length springs did you opt for?

[unariciflocos 49 1 Cars]

Gaz supplied mine with helper springs fitted, might be worth giving them a call, but please listen to Tom, don't drop the car that low. You'll be a hazard to yourself and others.

[Iain-gti 6]

maybe i wrote it wrong the wheel is about 1cm from the wheel arch.