cheesegrater 43 1 Cars Posted June 18, 2012 I'm after 2 new doors for my Miami ph2 GTI but will any door spec 205 fit as in how are the mouldings attached or is it just easier to find two good GTI doors? Also I have the litten plug style door connectors, how easy is it to convert these back to the rubber boot style, are they link looms or hardwired into the back of the fusebox? Thanks Tom Share this post Link to post Share on other sites
Tom Fenton 1,536 Posted June 18, 2012 By far easiest is to get the right doors. The cut outs for the wiring link are a different size. The non-GTI doors don't have the mounting rivets for the bodykit. Nothing insurmountable but worth trying to get the correct bits for the car to make life easier to be honest. Share this post Link to post Share on other sites
steve@cornwall 100 Posted June 18, 2012 would definately go for Gti doors, just for the moulding fixings issue. Whilst its very easy to whack a set of mouldings on with some self tappers - the peugeot system is really quite clever and allows for the plastic moulding to expand! Any sunshine directly on them and my self-tapped mouldings start bowing out from the door and looking rediculous!! Share this post Link to post Share on other sites
B1ack_Mi16 67 Posted June 18, 2012 It's quite easy to just attach the Peugeot rivets to the door though, and use the standard mounting kit. Share this post Link to post Share on other sites