Sinbad 16 Posted June 17, 2012 I have a base model rear beam on my 1.6 gti and swapped the gti drums onto the base model hubs. After searching on here it says the drum nut should be 215nm tight.If i go anything tighter than hand tight the drum will stop turning? Have i missed something off?? Or would i have to keep the base model drums and live with the narrower track? Share this post Link to post Share on other sites
Tom Fenton 1,536 Posted June 17, 2012 Have you swapped just the drum, or the backplate and shoes as well?? Share this post Link to post Share on other sites
Sinbad 16 Posted June 17, 2012 Just the drum Tom,i asked on here and got told to swap the torsion bars and the drum as the drums are wider. Should i have swapped the lot? Share this post Link to post Share on other sites
Sinbad 16 Posted June 17, 2012 (edited) FXXXS Sake!!!! haha Thanks for you help Good job i still have them! Edited June 17, 2012 by Sinbad Share this post Link to post Share on other sites