Nissan Calipers

[damo 17 2 Cars]

Im i right in thinking the s14 nissan calipers from a 200 sx fit a 205?

 

Wondering as this could be a cheap upgrade

 

no idea whats involved and cant find much about how its done.

 

Any pointers anyone?

 

info if it helps - steel 4 pot calipers 200sx s14a. the distance between centre of the bolt hole on caliper to the other bolt hole is 10cm, approx 4 inches

Edited May 29, 2012 by damo

[Ryan 99]

The bolt spacing on the 205 is 82mm.

[stef205 92 1 Cars]

I would get discs on the rear before you upgrade the fronts to big calipers

[welshpug 1,655]

I would get discs on the rear before you upgrade the fronts to big calipers

 

I wouldn't bother, drums are great.

[tri_longer 25]

Got to agree with Mei, I have never found drums to be underpowered on mine.

[MiniGibbo 142]

the 266 front and oem tiny drums on the back combo on mine never seems to not be able to lock the wheels... good enough for me tbh

[allye 530 3 Cars]

Skyline calipers have been, (that lovely white track car IIRC) But in any case a mounting bracket will need to be fabricated to fit them.

[Cameron 16]

If you're fabricating mounting brackets just fit a set of Lotus Elise / VX220 calipers - Mmm.. 1.1kg each.

 

As opposed to cast iron(?) 4 post which will weigh 2.7 metric f***loads.

[chipstick 382 1 Cars]

Which ever you chose, make sure they fit under the speedlines if you are intending to keep them. GTi6 calipers have minimal clearance, so anything bigger and you will need to change to an aftermarket wheel with more room.

[jackherer 543]

As opposed to cast iron(?)

 

I'm pretty sure 200sx brakes are cast iron, yes. A mate has a Nissan Cefiro and they have the 200sx caliper from the factory but his have been replaced with 300zx calipers which are apparently the same as (or very similar to) 200sx ones but in alloy.

[damo 17 2 Cars]

thx guys for the info