Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
MiniGibbo

Windscreen Washer's Don't Work..

Recommended Posts

MiniGibbo

My wiper jet things dont work, they used to work here and there buy since its been stood up they just won't have any of it now..?

  • Like 1

Share this post


Link to post
Share on other sites
BlueBolt

Can you hear the pumps running??

Share this post


Link to post
Share on other sites
MiniGibbo

Over my omp inox no, I can't hear anything lol..

Edited by MiniGibbo

Share this post


Link to post
Share on other sites
Anthony

When you pull the wiper stalk back, do the wipers move?

 

If they do, but the pump doesn't operate, it's either a dead pump or poor connection on the wiring to the pump

 

If they don't, it's probably the stalk that's died.

Share this post


Link to post
Share on other sites
BlueBolt

That's answered the problem with mine now!! Lol

Share this post


Link to post
Share on other sites
MiniGibbo

To get it to work in the past I had to pull it to me and up so I'm guessing a dead stalk :(

Share this post


Link to post
Share on other sites
MiniGibbo

Am I right in thinking I can fit a gti stalk to my car..?

 

Does phase make a lot of difference..?

 

 

 

Share this post


Link to post
Share on other sites
NeilGTi85

Check the connections on the pump, if that still does not work wire the pump direct to the battery to see if you can hear it running.

Share this post


Link to post
Share on other sites
miamichris

Also worth checking the pipes/jets aren't clogged up from being stood for a while

Share this post


Link to post
Share on other sites
BlueBolt

When you pull the wiper stalk back, do the wipers move?

 

If they do, but the pump doesn't operate, it's either a dead pump or poor connection on the wiring to the pump

 

If they don't, it's probably the stalk that's died.

 

No point checking what's being advised in the last few posts if there's no wipers when trying to washer??

Once the wipers are working then yes, check for clogging etc, but not much point yet as there's not even any motor attempting.....???

Share this post


Link to post
Share on other sites
flipperthebushkangaroo

Washer on mine packed up due to corrosion on the terminals, clean them up or re terminate and hey presto.

Share this post


Link to post
Share on other sites
miamichris

No point checking what's being advised in the last few posts if there's no wipers when trying to washer??

Once the wipers are working then yes, check for clogging etc, but not much point yet as there's not even any motor attempting.....???

 

He hasn't said if the wipers are working or not yet, so I was just throwing another thing out there to check, obviously thats if the wipers and pump are working then check for clogging.

Share this post


Link to post
Share on other sites
MiniGibbo

The wipers work, I was playing with them driving to sainsburys this morning and when I just pull the stalk the wipers do work so the stalk is actually ok it seems.

 

I'll have a look at the pump and wiring this week when I get chance.

 

 

Share this post


Link to post
Share on other sites
1 FAT PUG

mine wiped but didnt squirt, that was a dodgy stalk

Share this post


Link to post
Share on other sites
stufarri

The wipers work, I was playing with them driving to sainsburys this morning and when I just pull the stalk the wipers do work so the stalk is actually ok it seems.

 

I'll have a look at the pump and wiring this week when I get chance.

 

It may still be a dodgy stalk as this happened to mine, would still sweep but no motor running and there was power to it and the motor was fine. In addition the nozzles do get blocked if not used for a while.

 

I did all 3 to be sure, pump, stalk and cleaned the nozzles (took the ball bearings out) and no issues since. All in £20 off ebay.

Share this post


Link to post
Share on other sites
omri617

asking not to open a new topic , the motor of the windscreen wiper doesn't work. i got a new one and it works (connected it)

the problem is , i can't get the wipers extensions back into the motor. it seems too tight to fit.

is there any way to do it?

thanks

Share this post


Link to post
Share on other sites
omri617

would appreciate your help...can't figure out how to fit the extensions of the wipers into the motor!

Share this post


Link to post
Share on other sites
welshpug

what is "extensions of the wiper" ??

Share this post


Link to post
Share on other sites
omri617

front windscreen wipers -

their motor is connected to some kind of bars that connect to the wipers .

Share this post


Link to post
Share on other sites
MiniGibbo

To add to this ive just had a bash at trying to solve my none working front water jets, i bought a new gti stalk a couple of weeks back as that can be prone to causing problems and also give me a much needed "intimitant speed" base models dont have for some stupid reason...

Old vs new

SAM_0037.jpg

Sadly it didnt help... ah well at least i now have intimitant wipers so thatll stop bugging the s*it out of me :fcuk:

Next up was to check the other end which for some reason has had a zip tie wrapped around it..?

SAM_0038.jpg

I pulled the plug off and found the spades are a little crusty so gave them a clean

crusted,

SAM_0039.jpg

that also didnt make a difference so im a bit stuck again............

Share this post


Link to post
Share on other sites
BlueBolt

is the new wiper stalk definitely working with the washer function??

Share this post


Link to post
Share on other sites
MiniGibbo

I pull on it and it wipes the screen three times, and all speeds work.

 

The rear works 100%

 

 

 

Only thing i can think of is its the pump... or the wiring :(

Share this post


Link to post
Share on other sites
johnnyboy666

try wd40 on the terminals, if that doesnt work, get a new washer pump (less than a tenner i think)

Share this post


Link to post
Share on other sites
allye

Like I said in your project thread, my money is on corroded earth.

Share this post


Link to post
Share on other sites
MiniGibbo

Wheres the earth too it dude, I traced the wire with the plug in it and that goes for about six inches before going into the loom..?

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×