Diy Powder Coating

[harryskid 193]

Found this but it looks a bit complicated !

[GilesW 41]

There's nothing really DIY about all that. In fact it highlights why almost everyone would never bother to powder coat DIY.

[pugpete1108 62 1 Cars]

I was gonna say the same, all pro kit so not really DIY ?

 

Bet that oven cost a fair few quid

[Slo 283 1 Cars]

what does the electric charge do if it can just fall off with vibration shock? is it just static electricity holding the powder on before its baked?

[welshpug 1,657]

yup.

[Batfink 201]

I work at a place doing powder coating and his setup is hardly diy. We use better machines though that electrostatically charges the powder particles.

Its probably more cost effective to get a batch of parts done at your local powder coater.

[harryskid 193]

Yes when i saw this i thought it would not be some thing i would try !

[SurGie 54]

Powder coating isn't really the best for corrosion resistance and your money would be better spent getting a 2k spray set up. Then you can 2k epoxy primer it all, which will last a long time.