Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
omega

Is There A Diffrence Between A 205 1.6 Beam And 1.9?

Recommended Posts

omega

i thought all 205 gti beams where the same [apart from disc/drums] and if you wanted a bit wider track you fitted a 309 beam.but while shopping saw a 205 feature in a car magazine and it said that the 1.6 beam was diffrent.is this true and if so whats diffrent?

Share this post


Link to post
Share on other sites
Tom Fenton

Don't believe all you read in magazines !

Share this post


Link to post
Share on other sites
j_turnell

The only difference between a 1.6 and a 1.9 beam is one has drums and one has disks and the slight difference in track width is as a result of that. The tube, torsion bars, arb and arms are the same. Very early 1.6 beams had different amount of splines on the torsion bars and arms iirc? but tbh these days thats not really an issue as there isnt many of those around!

Share this post


Link to post
Share on other sites
pug_ham

Not forgetting the different front mounts between the 1.6 & 1.9 beams as well..

 

g

Share this post


Link to post
Share on other sites
welshpug

Drum stub axles are different, a bit shorter, other than the smaller splines James mentioned on very early 1.6 beams, and the mounts Graham mentions they'll be the same

 

Track widths were different due to the narrower and different offset wheels as well as drum/disk variation.

Edited by welshpug

Share this post


Link to post
Share on other sites
omega

Don't believe all you read in magazines !

 

very true,

but i didnt say i believed it

,but am always looking to improve my knowledge so hense the question.

  • Like 1

Share this post


Link to post
Share on other sites
omega

 

Track widths were different due to the narrower and different offset wheels as well as drum/disk variation.

 

so maybe this is what they ment?

but do you have to be a driving god to tell this?

Share this post


Link to post
Share on other sites
Tesstuff

very true,

but i didnt say i believed it

,but am always looking to improve my knowledge so hense the question.

 

I don't believe a word, our pm conversations prove that :P:lol:

Share this post


Link to post
Share on other sites
RossD

From the factory they actually had different dampers too.

Share this post


Link to post
Share on other sites
ALEX

My 1.6 CTi beam has thinner torsion bar shafts and ARB than my 1.9 Gti had. The ARB end plates are thinner too.

In fact The whole of the suspension on my CTi is more like the 1.4 XS than a GTi.

Share this post


Link to post
Share on other sites
welshpug

yup thats quite right, they are a base model bar running XU engines brakes and trim.

Edited by welshpug

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×