Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
GSXR_J

205 Or 106 Eibach Springs?

Recommended Posts

GSXR_J

Hi there, just wondering if anyone can confirm if the Eibach 106 springs part no.E20-70-001-01-20 45-50mm drop will fit onto a 205 Gti and if so will they lower the car any more than the 205 eibach kit 7001 would?

Cheers!

Share this post


Link to post
Share on other sites
pug_ham

They will fit but I don't about the change in ride height.

 

g

Share this post


Link to post
Share on other sites
Jarrus

Wouldnt the spring rate be different though? What are the 205 ones rated at?

Share this post


Link to post
Share on other sites
Batfink

Both cars are similar in weight so I would not worry too much

106 sportline spring rate is progressive

80 - 240lb

 

I think the 205 ones are progressive as well but I will find out tomorrow.

Edited by Batfink

Share this post


Link to post
Share on other sites
Batfink

I cannot get the exact figure but 205 ones are roughly 15 - 40 nm progressive spring rate so thats basically the same so I'd have no worry about putting the 106 springs on!.

Share this post


Link to post
Share on other sites
welshpug

any idea on the 306 gti6 springs?

Share this post


Link to post
Share on other sites
matt.f

Will 205 springs fit a 106 strut?

Share this post


Link to post
Share on other sites
welshpug

yes, hence this discussion.

Share this post


Link to post
Share on other sites
GSXR_J

Do we know if the 106 springs actually lower a 205 by the 50mm advertised?

Share this post


Link to post
Share on other sites
welshpug

I don't think they drop quite that far if they are designed for the iron TU5, the 5J4 is a little heavier than an 8 valve XU apparently, 106 generally is a little heavier anyway, apart from the beam.

Edited by welshpug

Share this post


Link to post
Share on other sites
Anthony

Would you really want the car to be sat much lower than it is on 7001's anyway? Even with an alloy block 8v the car sits as low as you'd sensibly want it (IMO)

Share this post


Link to post
Share on other sites
GSXR_J

Put some 7001's on and it seems a little high still, just wondering wether to swap them for the 106 items to get it sat alittle lower????

Share this post


Link to post
Share on other sites
GSXR_J

Could actually still be lowered another 20mm after fitting 7001's.

Share this post


Link to post
Share on other sites
Anthony

If you've only just fitted them, have you let them settle over a few miles?

 

This is my 205 1.9 GTi with 7001's on...

 

IMG_5788.sized.jpg

Share this post


Link to post
Share on other sites
GSXR_J

Yep given them couple of hundred miles so guess that should be enough! Nice picture by the way!

Share this post


Link to post
Share on other sites
Powers

Where is the cheapest place the buy the Eibach springs?

Share this post


Link to post
Share on other sites
welshpug

Batfink does them at KAM racing, Miles can supply as well, depends what you're after though, standard diameter lowering or small diameter height adjustables?

 

Merlin DT etc do them as well.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×