Door Loom Pin Part No's

[marksorrento205 80]

Anyone know the part no for a late phase 2.5 door loom pin part no? I need some pins for the plug that goes in the A pillar where the door loom connects. I think they are the same on the 306 at various places if it helps

 

Cheers

[welshpug 1,656]

6541 E8 HARNESS CLIP A=1,5 B=0,35 A 1MM2

 

6541 E9 HARNESS CLIP A=1,5 B=1,1 A 2MM2

 

6542 R1 HARNESS CLIP A=2,8 B=0,35 A 1MM2

 

6542 R2 HARNESS CLIP A=2,8 B=1 A 3 MM2

 

6541 F1 HARNESS CLIP A=3 B=1 A 2 MM2

 

6541 F2 HARNESS CLIP A=3 B=3 A 4 MM2

Edited March 20, 2012 by welshpug

[marksorrento205 80]

Cheers WP!

Edited March 20, 2012 by marksorrento205

[welshpug 1,656]

np, let me know what sizes you needed, they're the same as 306 and zx engine loom 306 door looms etc.

 

same pin used either side of the connectors.

 

oh, easy to find BTW,

 

on the left hand side, under "Miscellaneous"

 

Fastenings, fixings and connectors catalogue

 

Edited March 20, 2012 by welshpug

[Ryan 99]

What's the difference between the different terminals? Obviously different wire sizes, but what do the other numbers mean?

[welshpug 1,656]

A is the width of the terminal, not sure what B is.