Rear Beam Rebuild Cost

[welshpug 1,646]

err, what the hell do you spend the extra £100 on ?!

[Slo 283 1 Cars]

mmm im wondering that too unless hes doing wheel bearings as well???

[welshpug 1,646]

but that's nothing to do with the beam rebuild

 

I guess there's the bushes to the body, but that's still not "beam rebuild" full suspension rebuild maybe...

[Slo 283 1 Cars]

well heres my recepit only thing i didnt add to the cost was paint i suppose

[jord294 89]

err, what the hell do you spend the extra £100 on ?!

 

bushes, mounts, d/e studs, half nuts, washers, plastic plug etc

 

it's the smaller stuff that mounts up

 

and the bushes on each arb end plate are over £5 each

[jord294 89]

my parts list for axles i supply has over 16 different part numbers

[welshpug 1,646]

I see, I don't replace those small bits unless they're bust, no need!

[jord294 89]

I see, I don't replace those small bits unless they're bust, no need!

 

Some don't. I understand that. But I prefer to fit new

 

OT the pe2s are 0505 and 0405

[ALEX 98 1 Cars]

I replaced the bushes aswell because I had the beam tube powder coated.

One arm shaft was pitted aswell, so in all including the coating its cost me about £400

Saying that I had a load of other bits coated for the £100 mixed in with that.

 

I ended up getting the metal ring seal retainers from the dealer.

I wonder why Dean Hunter couldn't get them?

Edited April 29, 2012 by ALEX

[Slo 283 1 Cars]

I knocked my shafts out with an old long socket and a sledge hammer instead of using a press