Rear Beam Rebuild Cost

[starky5 18]

Just a quick one, has anyone recently fully rebuilt a 205 rear beam? Mine is suffering so im just wondering if you save enough money refurbing your own beam to make it worth the effort.

 

So realistically how much does it cost to rebuild a beam?

[welshpug 1,646]

anywhere between £40 orr for the bearings and seals alone, to £200 for the shafts and bearings and a few fixings, add more for a donor beam tube if required.

[starky5 18]

ok, ive seen auto 5 sell rebuilt rear beams for £360 so doing it myself would save a fair bit on their prices. Do you know anywhere else that sells recon beams?

[jord294 89]

a few forum members on here can supply you with a rebuilt beam

 

may mean a bit of travelling, but miles or welshpug maybe able to help, as they are closer

 

there is also anthony, tom fenton and alistairh?

[Miles 331 1 Cars]

There's a beam company down your way somewhere, No idea on there name thou but have been around years

[starky5 18]

There's a beam company down your way somewhere, No idea on there name thou but have been around years

Ahh right ill get searching see if i can find any info on them cheers

[rgp205 2]

SSP Engineering in Devon

http://www.sspengineering.co.uk/

[stef205 92 1 Cars]

I get all my beam parts from these guys.

 

(null)

[ALEX 98 1 Cars]

Anyone know if the kits on ebay item no. 320494733323 are worth the money or could I get them cheaper esle where?

[welshpug 1,646]

that'd cost you about £60 from a pug dealer (as does that guy, he gets it all from a dealer in Maidenhead)

[welshpug 1,646]

guide prices from Servicbox, multiply by 2 of course, and if you don't damage the screws etc then you can disregard those as well.

 

515310 SUSP BAR STUD 2.89 GBP

515409 CUP 1.45 GBP

515410 CROSSMEMBR SEAL 2.80GBP

515311 CROSSMEMB SCREW 0.62 GBP

513262 SOCKET 17.78GBP

515312 SUSP BAR WASHER 0.82 GBP

517403 CROSSMEMBR SEAL 2.82 GBP

[Slo 283 1 Cars]

Im glad someone asked about that as ive been pondering buying those kits and some of the other fixing kits too as well as the trailing arm shaft and bearing kits. think ill pop across the road to the dealer and ask about some prices and availability

[ALEX 98 1 Cars]

Im glad someone asked about that as ive been pondering buying those kits and some of the other fixing kits too as well as the trailing arm shaft and bearing kits. think ill pop across the road to the dealer and ask about some prices and availability

 

Glad I asked too.

I was toying with the idea of taking the bearings over to one of the many bearing factors in Huddersfield, to see if they can find a match. (They should be way cheaper than the dealer)

If I had the part numbers it would be easier.

Ive' been looking on INA product finder, but had no luck so far, I'm starting to think they're special.

http://medias.schaef...aZ2gr3a6fjw6#16

 

Edit: sorry the sizes are 47x53x22 and 42x49x22 that we need.

Edited April 12, 2012 by ALEX

[welshpug 1,646]

I don't think £17 ish is too bad for two sealed needle roller bearings and a seal myself.

[lemmingzappa 75 1 Cars]

I can vouch for Anthony's work !

[ALEX 98 1 Cars]

I don't think £17 ish is too bad for two sealed needle roller bearings and a seal myself.

That what socket is then?

Servicebox ref I'm guessing.

 

I'll get them from dealer then.

[welshpug 1,646]

its the kit of inner and outer bearing and the seal, the other part numbers are shown in the stickied thread.

[ALEX 98 1 Cars]

its the kit of inner and outer bearing and the seal, the other part numbers are shown in the stickied thread.

Cheers for that!

[ALEX 98 1 Cars]

Looks like I need a new shaft for one of the trailing arms.

Any ideas on how much I should be paying for one?

£90 on ebay!

[welshpug 1,646]

they are about that much from pug.

 

I think martin (crf450) and allan (allanallen) at bridgecraft engineering were looking into producing them, don't know what the outcome of that was.

Edited April 13, 2012 by welshpug

[ALEX 98 1 Cars]

Well I managed to pick up everything today except the metal ring that holds the seal in place.

Part number 515410

The specialist (Dean Hunter) told me these aren't available, Not sure where else to ask other than the dealer.

Anyone know where I could get a pair?

[welshpug 1,646]

you'll only get those from a dealer or as part of an aftermarket kit possibly

[jord294 89]

Well I managed to pick up everything today except the metal ring that holds the seal in place.

Part number 515410

The specialist (Dean Hunter) told me these aren't available, Not sure where else to ask other than the dealer.

Anyone know where I could get a pair?

 

i'm pretty sure if you bought most parts from dean hunter, you'd of gotten them cheaper from peugeot main dealer

[Slo 283 1 Cars]

Just bought a full set from my main dealer cost me almost £280 for 2 trailing arm shafts part number 5176 17 @ £78.29 each and all the bearings and seals, and the cups part number 5154 09 you can get them from dealers but only in packs of 5 so i have 3 to sell on and the metal ring seal that holds everything in place part number 5154 10 are £2.80 each

Edited April 28, 2012 by Slo

[jord294 89]

 

If someone went and bought all new parts to rebuild an axle, it's more around £380 inc vat