Door Handle - Gap Between Handle And Door

[jason7579 5]

 

The handle on my peugeot doesn't sit flush against the door (as seen above).

 

I think I may have the wrong screws fixing the handle to the door but wondered if it could be any other common reason or is it a standard feature. It is similar on both sides of the car and there are not enough 205's about to check any others in my area.

 

Thanks

[welshpug 1,648]

likely to be a missing nut or the door is bent where the handle is bolted on.

[jason7579 5]

Its secure to the door, so don't think there are any missing fixings. I will try to take the handle off to see if the door is bent. Thanks.

[stufarri 98 3 Cars]

Has the spring underneath the handle slipped off? - mine did this and the handle stands proud slightly.

 

You need to hook the spring back over the tab on the handle if this is the case - the spring pulls the handle closer to the door.

[jason7579 5]

Going to give the car a good clean tomorrow and will check if it's bent or the spring is unhooked then, thanks for the help.

[Paul_13 212 1 Cars]

There should be a torque head bolt there, check it's present