deryck3 1 Posted February 22, 2012 Hi, I just wondered if anybody could help me, Im just on with finishing rebuilding my beam, and I've got 21mm tb's and 23mm arb to fit, I was wondering what length I should set the dummy shock to id like it to sit as near to level as possible to the front which will have the peter loyd rallying tarmac springs which are -1 inch and 180lb. Thanx for any help Share this post Link to post Share on other sites
Anthony 1,002 Posted February 22, 2012 Somewhere around 298mm should be a good starting point, assuming they really are 1" lower than standard. Share this post Link to post Share on other sites
Tom Fenton 1,536 Posted February 22, 2012 It is always a bit of a trial and see. I would try around 305mm and see how it sits. Share this post Link to post Share on other sites
deryck3 1 Posted February 23, 2012 Ok thanks for the help Share this post Link to post Share on other sites