Turbo First Start Nightmare

[ade 4wd 11]

Are you using the original turbo flywheel and CPS?

[bassline21 1]

no 205 flywheel and cps. ive made a bracket so the cps is sitting in the right positin on the flywheel. and it is sending a signal. havent had chance to get out in the evenings yet but hopefully can tonight to get cracking.

[Tom Fenton 1,542]

Which 205 flywheel?

[bassline21 1]

the one that was on my original 1.9 engine. f reg. ive been told i need the turbo flywheel and mi16 clutch with turbo cps. so engine out job.

[Tom Fenton 1,542]

There is your problem. You need to use a flywheel with the timing ring on it.

[jackherer 543]

the one that was on my original 1.9 engine. f reg. ive been told i need the turbo flywheel and mi16 clutch with turbo cps. so engine out job.

 

Not an engine out job, just the gearbox.

 

You need an Mi16 or GTI6 flywheel though.

[ade 4wd 11]

As said, you need a flywheel with timing teeth and the right CPS.

 

Timing teeth can be seen on this pic.

 

Crankshaft Position Sensor.

[welshpug 1,657]

the one that was on my original 1.9 engine. f reg. ive been told i need the turbo flywheel and mi16 clutch with turbo cps. so engine out job.

 

no, you need the XU10 flywheel form a car with a BE box, the XU10 turbo used an ME or ML box with a much larger clutch which wont fit in the BE bellhousing.

[jonnyturbo 3]

is the s16 flywheel the same as the gti6?

[M@tt 77]

is the s16 flywheel the same as the gti6?

yes the s16 is a XU10 block