Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
jon.ford

309 Shafts And Rack Length

Recommended Posts

jon.ford

I have fitted 309 shafts, Rose jointed arms standard top mounts. I intend to run about 1.5 degrees of neg camber. I have a 205 gti power rack.

The question is Will I run short of thread on track rod end/ drum stick ( is 309 rack the same as 205)

Jon ford

Share this post


Link to post
Share on other sites
j_turnell

There should be plenty of thred left on the TRE's. As long as the amount of thred engaged is the same or greater than the size of thred there's no problem. E.g m12- 12mm engaged.

Share this post


Link to post
Share on other sites
Baz

205/309 racks are the same.

Share this post


Link to post
Share on other sites
brumster

I definately had a problem with the 205 rod ends when I went 309 lengths, there was not as much thread screwed into them as I'd have liked - but my rack was an unknown at the time, having come with the car, so could well have had 1600 rods screwed into it or something. Put it together and you'll know if it's not right, as you'll have far too little thread going into the track rod ends for comfort. I sourced some new 309 track control arms and some new rod ends while I was at it, and all was fine.

Share this post


Link to post
Share on other sites
jon.ford

Thanks for your help I will set it up and go for 309 track rod end if required, are they dealer part only does anyone know overall length of 309 compared to 205 track rod ends.

Jon

Share this post


Link to post
Share on other sites
Miles

Track rod ends are all the same, even 306 ones, Nice easy way around this thou which is simple when you think about it

.

.

.

.

.

.

306 Arm's

Share this post


Link to post
Share on other sites
jon.ford

Track rod ends are all the same, even 306 ones, Nice easy way around this thou which is simple when you think about it

.

.

.

.

.

.

306 Arm's

306 arms do you mean rack track rod ( drum sticks) or something else.

Jon

Share this post


Link to post
Share on other sites
Miles

The control arm, From the rack to the rod end

Share this post


Link to post
Share on other sites
jon.ford

The control arm, From the rack to the rod end

Got you are they easy to change and where can I get them from.

Jon

Share this post


Link to post
Share on other sites
Miles

Very easy, I;d get some new boots too.

Most motorfactors sell them

Share this post


Link to post
Share on other sites
danny56712

So you are saying use 306 / Xsara Track rods with normal 205 ends

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×