How Long To Remove Dash Loom And Engine Loom?

[Daviewonder 533 3 Cars]

Hi All

 

As above really. I need to grab a dash loom with fuse box, engine loom and headlight loom etc (basically all the wiring from the front seats forward).

 

I'm just wondering how much time roughly I would need to put aside for this task?

 

(Phase 1.5 1.9)

 

Cheers, Dave

Edited January 13, 2012 by Daviewonder

[Simes 248 2 Cars]

3 hours max.

 

Dash out should take less than an hour.

Get the engine loom out first as the ECU plug goes through the buklhead nicely.

Remove the centre console

Drop the steering column (remove the wheel if you're bothered too). Once you've loosened the dash from the bulkhead it should come away nicely. and pull the dash forward.

 

Headlamp loom is straightforward.

Edited January 13, 2012 by Simes

[welshpug 1,657]

dash out first, given it is bolted down on top of the ecu loom.

[Strictly_Derv 34]

Are you going up there today? I might be there at some point

[Simes 248 2 Cars]

Out of interest is that at Bridges = Pease Pottage?

Not been there in ages.