harryskid 193 Posted January 11, 2012 Any one know if is possible to lower a 205 steering, about 50mm or so. I did this once on a mini with a kit and as i find the 205 colum a tad high i wondered if there's kits for this ? Share this post Link to post Share on other sites
welshpug 1,646 Posted January 11, 2012 no kits, but I have seen it done with just a few thick walled spacer tubes Share this post Link to post Share on other sites
harryskid 193 Posted January 11, 2012 no kits, but I have seen it done with just a few thick walled spacer tubes Was it any good ? Share this post Link to post Share on other sites
allanallen 528 2 Cars Posted January 11, 2012 (edited) I've lowered it around 30mm on my 309, there might be some pics in my project thread. It improved the driving position loads for me as my seats are mounted very low. Basically I've cut the studs of the shell that the column mounts to and drllied them through 8mm. I then turned up some spacers and wahers and fitted with m8 nuts and bolts. Easy peasy. Al Edited January 11, 2012 by allanallen Share this post Link to post Share on other sites
allanallen 528 2 Cars Posted January 11, 2012 Here you go Share this post Link to post Share on other sites
harryskid 193 Posted January 12, 2012 Nice one Al , i have the same problem and that might just be the answer! Share this post Link to post Share on other sites