5Th Injector

[Nbettley 4]

does anybody know where i can get a pipe with a injector thread on it so i can put it in just before the throttle body on my turbo conversion, or has anybody got a turbo technics throttle body with the injector holder built into it?

thanks for your help in advance.

 

Nick

[welshpug 1,661]

injectors aren't threaded, they sit in a hole and are held in by the fuel rail.

[Nbettley 4]

i know they are held in by the rail on the 4 standard injectors, so how would i mount the 5th injector because it would have to sealed tight so there is no boost leak

[Daviewonder 533 3 Cars]

Will you be starting a progress thread?

[Nbettley 4]

yes i will be at some point only just got the head off to lower the compression so will up load some pictures when i have got a bit more done

[Henry Yorke 269 3 Cars]

I guess you are running an MF2 set up then? 5th injectors seem to have died out now as people put bigger injectors in from other cars and have mappable ECUs. Try considering an ecu from something like a 2.0T. I run one on my 1900 CTI where I have fitted a turbo on it aftermarket and it has run well and reliably for well over 5 years. the downside is you are limited to half a bar boost, but you can still get around this with electronic boost controllers etc