dave205 19 Posted January 10, 2012 Whats the best way of sanding a couple of layers of old flakey/shi*y paint of my front valance? What sanding blocks/paper is best? Share this post Link to post Share on other sites
dave205 19 Posted January 11, 2012 Anybody any suggestions as i need to get on with this job! Share this post Link to post Share on other sites
flyfisher 6 2 Cars Posted January 11, 2012 if you have to do it by hand start by useing a block and 240 wet n dry going down to 600 wet n dry to have a nice base for your primer then flat down with 800 wet n dry degrease dry mask and colour coat but best if you could get a d. a sander and 240 dry sand it off. hope this helps Share this post Link to post Share on other sites
M@tt 77 Posted January 11, 2012 These abrasive pads are good for surface prep especially on contoured surfaces http://www.toolstation.com/shop/Painting+Decorating/Sanding+Paper/Sponge+Abrasive+Pads+100g+Meduim/d150/sd1730/p39338 http://www.toolstation.com/shop/Painting+Decorating/Sanding+Paper/Contour+Sanding+Pads/d150/sd1730/p10736 Share this post Link to post Share on other sites
dave205 19 Posted January 11, 2012 Cheers i'll check them out Share this post Link to post Share on other sites