Panel Sanding

[dave205 19]

Whats the best way of sanding a couple of layers of old flakey/shi*y paint of my front valance?

 

What sanding blocks/paper is best?

[dave205 19]

Anybody any suggestions as i need to get on with this job!

[flyfisher 6 2 Cars]

if you have to do it by hand start by useing a block and 240 wet n dry going down to 600 wet n dry to have a nice base for your primer then flat down with 800 wet n dry degrease dry mask and colour coat but best if you could get a d. a sander and 240 dry sand it off. hope this helps

[M@tt 77]

These abrasive pads are good for surface prep especially on contoured surfaces

 

http://www.toolstation.com/shop/Painting+Decorating/Sanding+Paper/Sponge+Abrasive+Pads+100g+Meduim/d150/sd1730/p39338

 

http://www.toolstation.com/shop/Painting+Decorating/Sanding+Paper/Contour+Sanding+Pads/d150/sd1730/p10736

[dave205 19]

Cheers i'll check them out